2014年2月17日星期一

cisco 3750 high cpu

We have a cisco WS-C3750X-24T-L    that sometimes shows high cpu.

Please see details below. When cpu was running high, we noticed

2 process that seems to be the culprit. One is VMATM Callback and one is IP Input.

What is VMATM? Can't seem to find much documentation with it.

Also, IP Input seems to be well documented but I'm wondering how it ties into VMATM if it does?

CPU utilization for five seconds: 99%/29%; one minute: 99%; five minutes: 90%

CPU utilization for five seconds: 73%/28%; one minute: 76%; five minutes: 77%

PID Runtime(ms)   Invoked      uSecs   5Sec   1Min   5Min TTY Process

237          49        53        924  0.00%  0.00%  0.00%   0 VMATM Callback<----------normal usage

237      119304      3710      32157 31.74% 27.42% 17.27%   0 VMATM Callback

198      541972   1524333        355  1.11%  0.55%  0.41%   0 IP Input <------------------normal usage

198    21565303  54238166        397 25.30% 25.51% 25.52%   0 IP Input

Version:

c3750e-universalk9npe-mz.122-55.SE3.bin

CSCtj95182 - High CPU on 3750 when network scanner is run

CSCtf23298 - tacacs-server host ' ' single-connection causes high CPU utilization

 This 'VMATM' process mainly takes care of the removing the

addresses learnt on an interface when the interface goes down.


There are couple of things to be check on this kindly open a TAC case with cisco so that we provide you in depth WS-C3750X-24T-S   analysis on the same

没有评论:

发表评论