How to configure Power Stack Parameters on Catalyst 3560-X Switch?

Cisco delivers a comprehensive portfolio of switching solutions for Borderless Networks, data centers, and smaller businesses. These solutions are optimized for a wide range of industries, including service providers, financial services, and the public sector. The WS-C3560X-48T-L Series Switches is an enterprise-class lines of stackable and standalone switches.

      

Command

Purpose

Step 1

configure terminal

Enter global configuration mode.

Step 2

stack-power stack power stack name

Enter the stack power stack name and enter power stack configuration mode. The name can be up to 31 characters.

Step 3

mode {power-sharing | redundant} [strict]

Set the operating mode for the power stack:

•power-sharing—The input power from all switches in the power stack can be used for loads, and the total available power appears as one huge power supply. This is the default.

•redundant—The largest power supply is removed from the power pool to be used as backup power in case one of the other power supplies fails. This is the recommended mode if enough power is available in the system.

•strict—(Optional) Configures the power stack mode to run a strict power budget. The stack power needs cannot exceed the available power. The default is non-strict.

Step 4

end

Return to privileged EXEC mode.

Step 5

show stack-power

Verify your entries.

Step 6

copy running-config startup-config

(Optional) Save your entries in the configuration file.

For more Cisco WS-C3560X-48T-S information please click here